SOLID WOODEN PANEL DOORS
Made from 100% kiln-dried solid or laminated lumber. Produced with color-matching selection of wood species to achieve one-tone finish. Skillfully manufactured on as-per-order basis only.
PATECO’s Solid Wooden Panel Doors are made from selected/graded lumbers mostly Tanguile or Lauan species which have been kiln dried to the desired moisture content. From our K.D. chambers, these lumbers achieve 12% Moisture Content (MC) or less but during storage and/or processing, it may change depending on the relative humidity of the environment.
PATECO’s Solid Wooden Panel Doors are typically more dense, pre-sanded, and in precise cut according to client’s specifications.
*We also accept custom-made sizes and designs.
See also other doors and wooden products:
Molded Doors · Flush Doors · Wooden Panel Doors · Closet and Cabinet Doors · PVC Doors
Air Vents · Door Jambs · T&G, V-CUT, S-CUT · Lattice Dividers · Mouldings · S4S · Stair Components
HOME · PRODUCTS · RETAIL STORES · ABOUT · CONTACT US
Hm po ung wpd parquet 90 ang size
LikeLike
Hi Ms. Analiza menor. Thank you for visiting our page and for your interest in our products. Replied through your email. Have a good day!
LikeLike
I would like to inquire prices for –
2 pcs door jamb – 0.8 x 2.40
2 pcs door jamb – 0.7 x 2.40
solid wood door – 0.8 x 2.40 (2 pcs)
solid wood door – 0.7 x 2.40 (2 pcs)
solid wood panel flooring (total area is 42 square meters)
would appreciate your quotation and recommendations. Thanks
LikeLike
Hi Sir Francis Aguilar, good day. Thank you for visiting our site and for your interest in our products. We sent you an email, hope you could talk with one of our sales executive soon. Happy Holidays sir!
LikeLike
Hi, are your s4s finger joint boards treated ? Thank you
LikeLike
Hi Sir Jacob, good day. Thank you for visiting our page and for your interest in our products. For your inquiry, yes sir our S4S Finger-jointed boards are kiln dried. We also sent you an email to further assist you.
LikeLike
Thank you for the response, is it okay to make chopping boards out of s4s wood ? Thanks
LikeLike
Hi Sir Jacob, for the S4S wood we do not recommend this to be used as chopping board material due to its hygroscopic property (absorbs water) which will sooner or later break. It is recommended to use a solid wood (solid in full dimension). Thank you and have a good day.
LikeLike
Hi Im Bernard xela Cruz from Kawit Cavite, I need Wooden Panel Door size 80 x 210
LikeLike
Hi Sir Bernard G. dela Cruz, good day. Thank you for visiting our website. We replied through your email to further assist you. Thank you and have a good day.
LikeLike